| Part
No. |
Key features |
|
Description |
Price |
|
Smoke
Products
|
| S220
SmokePen
|
Package Contains
1 Smoke Pen (re-usable)
6 Replacement wicks
Each wick will provide up to 3
hours of continuous
smoke or 360 individual 30 second tests. |
 |
Provides a continuous
trail of smoke.
The Smoke Pen can then be
easily extinguished by simply replacing the protective cover. The Smoke
Pen can now be stored and re-used for test.
This non-toxic, cool
burning emitter is ideal for air balancing, verifying ventilation, testing
smoke alarms, tests for negative or positive pressure and the list goes
on.
|
S220 $39.00
|
| S221 |
Refill
6 wicks for SmokePen |
SmokePen Refill (6 wicks)
|
S221 $29.00
|
|
Thermometers
|
| ST880
Infrared
Thermometer
|
Temperature Range: -58 to 536°F (-50 to 280°C)
Resolution: 1°F (1°C)
Accuracy: ±2% of reading
Optical Resolution: 8:1
Emissivity: Fixed at 0.95
Power Supply: Single 9V battery
Dimensions: 6.3 x 3.2 x 1.6 (160 x 82 x 41mm)
Weight: 6.4 oz (177g) |
|
Built-in laser pointer identifies target area
User selectable °F or °C
Fixed emissivity of 0.95
Optical resolution of 8:1
Display backlighting
Overrange indicator, Auto data hold (when trigger released) and Auto shut off
Includes battery and carrying case
|
ST880 $89.00
|
| ST612
Thermometer,
Thermocouple Dual temp
|
Temperature Range: -58 to 2000°F (-50 to 1300°C)
Resolution: 0.1°F/°C or 1°F/°C
Accuracy: ±0.5% of reading ±2°F/1°C
Power Supply: Single 9V battery
Dimensions: 165 x 76 x 43mm
Weight: 403g
|
 |
Maximum Hold plus Data Hold
Large LCD with backlight
User selectable °C or °F
User selectable 0.1°C or 1°C (0.1°F or 1°F) resolution
Accepts K-type thermocouples
Includes 9V battery and holster
Dual input thermometer provides differential
temperature measurements
Differential Temperature (T1-T2) mode freezes display
Scan Function (T1, T2, T1-T2, Max, Hold....)
|
ST612 $109.00
|
|
Air Velocity Meters
|
| AM4204
Anemometer/
Thermometer, "Hot Wire"
|
Air Velocity Range: 0.2 to 20.0 m/s;
0.7 to 72.0 kph; 0.5 to 44.7 mph; 40 to 3940 fpm; 1.0 to 31.1 knots
Temperature Range: 32 to 122°F (0 to 50°C)
Power Supply: Single 9V battery
Dimensions: 180 x 72 x 32mm
Weight:381g
|
 |
Simultaneously displays air velocity and temperature
Measuring Units: m/s, kph, fpm, mph, knots
Data hold, Record (Max/Min)
RS232 serial interface
Includes telescopic probe w/ 1m cable, 6 x "AAA" batteries and hard carrying case
|
AM4204 $395.00
|
|
Pressure Meters
|
| ST8890
Manometer, digital
|
Pressure Ranges: 5.000 psi; 138.3 in H2O; 0.344 bar;
344.7 mbar, 34.47 kPa; 1.018 inHg; 258.5 mmHg,
80.00 oz in2; 11.53 ft H2O; 351.5 cmH2O; 0.351 kg cm2
Accuracy: ±0.3% f.s.
Repeatability: ±0.2% f.s.
Hysteresis: ±0.29% f.s.
Max. Pressure: 5 psi
|
 |
Measure gauge and differential pressure from 0 to 5 psi
11 selectable units of measure
Dual LCD readouts with backlighting
Min/Max/Avg recording with time stamp
Data hold freezes the displayed reading
Push button zero adjust and offset readings
Data Hold and low power indications
RS-232 serial port
Includes RS232 cable, tubing, carrying case and batteries
|
ST8890 $149.00
|
|
Temp/RH
Data Loggers |
| ST171
Hygrometer
|
Temperature Range: -40 to 70°C (-40 to 158°F)
Accuracy: ±2°C (±3.6°F): -40 to 10°C & 40 to 70°C (-40 to 14°F &
104 to 158°F); ±1°C (±1.8°F): 10 to 40°C (14 to 104°F)
Humidity Range: 0 to 100% RH
Accuracy: ±5.0%: 0 to 20% & 80 to 100%; ±3.5%: 20 to 40% & 60 to
80%; ±3.0%: 40 to 60%
Sampling Rate: User selectable rate: 2s, 5s, 10s, 30s, 1m, 5m, 10m,
30m, 1h, 2h, 3h, 6h, 12h, 24h
Power Supply: 3.6V lithium battery
Dimensions: 130 x 30 x 25mm
Weight: 20 g
|
 |
Stores up to 16,000 temperature and 16,000 humidity readings
Alarm display if user-defined max/min values are exceeded
Displays all status information through two LEDs
Simply plug the logger into the USB port of your computer to begin downloading - no cables or wires are required
Includes wall mount bracket and Windows compatible software
|
ST171 $79.00
|
|
Gas Detectors
|
| CO180
Gas
Detector, Carbon Monoxide
|
Range: 1 to 1000 ppm CO
Resolution: 1 ppm CO
Accuracy: ±5% or ±10 ppm
Dimensions: 6.3 x 2.2 x 1.6" (160 x 56 x 40mm)
Weight: 6.4 oz (180g)
|
 |
Max, Data hold and Auto shut off
Utilizes a stabilized electrochemical gas specific sensor
Audible alarm starts at 35ppm
Backlit LCD display
Includes carrying case and 9V battery
|
CO180 $175.00
|
| GD3300
Gas
Detector, Combustible
|
Sensitivity: 50 ppm methane
Warm-up Time: Approx. 5 minutes
Response Time: < 2 seconds
Alarm Limit: At 10% LEL for methane
Power Supply: 3 x "C" batteries
Battery Life: 8 hours of continuous use
Probe Length: 16"
|
|
Following is a partial list of the more common gases detected: natural gas; propane; butane; methane; acetone; alcohol; ammonia; steam; carbon monoxide; gasoline; jet fuel; hydrogen sulfide; smoke; industrial solvents; lacquer thinner; naphtha
Audible and visible alarms
Low power semi-conductor sensor
Includes soft carrying case and batteries
|
GD3300 $99.00
|
| C380
Gas
Detector, Freon
|
Gases Sensed: CFCs: R11, R12, R13; HCFCs: R22, R502, R500; HFCs: R134a, R123, R125, R23, R404A, R407C, R410A
Sensitivity: R22, 134a: Hi 6g/year, L: 30g/year R404A, 407C, 410A: Hi 8g/year, L: 40g/year
Alarm Settings: Buzzer, Tricolour LED bar indicator
Sensor: Advanced ionization detection
Power Supply: Single 9V alkaline battery
Probe: 390mm (15") flexible stainless probe
Dimensions: 7.3" x 3.4" x 1.4" (18.5 x 8.5 x 3.4 cm)
Weight: 18 oz. (500 g)
|
 |
Detects all halogenated refrigerants
Quickly and accurately mark any leak spot
Semiconductor gas sensor
Instantaneous response time
Audible and visual leak indications
No user calibration required
Includes reference leak source and case
|
C380 $199.00
|
|
Multimeters
|
| ST922
Multimeter, AC/DC w/ temperature
|
AC/DC Voltage Range: 600V
Accuracy: AC: ±1.2%; DC: ±0.5%
AC/DC Current Range: 10A
Accuracy: AC: ±3.0%; DC: ±2.5%
Resistance Range: 40MΩ
Accuracy: ±0.8%
Frequency Range: 10MHz
Accuracy: ±1.5%
Capacitance Range: 200μF
Accuracy: ±3.0%
Duty Cycle Range: 99.9%
Accuracy: ±1.2%
Temperature Range: 760°C (1400°F)
Accuracy: ±3.0%
Dimensions: 150 x 70 x 48mm
Weight: 255g
|
|
0.5% basic DC accuracy
Diode check and continuity test
4,000-count resolution
Data hold function
Double molded plastic housing
EN61010-1 Cat. III 600V
Auto ranging and auto power off
Includes AD-1 temperature input adapter, TP-01 type
K thermocouple wire probe, TL-88-1 test leads, 6AM6X 9V battery,and CA-03 carrying case
|
ST922 $79.00
|
|
Clamp Meters
|
| ST332
Clamp meter, AC/DC, 400A
|
Model ST-332 ST-333 ST-335
AC Current Range: 400A
DC Current Range: 400A
AC Voltage Range: 600V
DC Voltage Range: 600V
Resistance Range: 40MΩ
Capacitance Range 100μF
'Frequency Range 150kHz
|
|
4000-count LCD with backlight
Data hold and zero functions
Diode test to 0.3mA
Continuity test
Auto shut off and low battery indication
Jaw opening 0.9 (23mm)
Complete with test leads, batteries and carrying case
Conforms to Cat. III 600V
|
ST332 $99.00
|
|
Appliance Meters
|
| P4400
Appliance watt meter
|
Operating Voltage: 115VAC
Max Voltage: 125VAC
Max Current: 15A
Max Power: 1875VA
Dimensions: 5 1/8"H x 2 3/8"W x 1 5/8"D
Weight: 5 oz.
|
|
Large LCD display
Cumulative Killowatt-Hour Monitor
Forecast Your Costs
Also display Volts, Amps, Watts, Hz, VA
0.2% Accuracy
|
ST4400 $29.00
|
|
Thermal Imagers
|
| HSI3000
Thermal Imager
|
Measurement Range: 14° to 482°F (-10° to 250°C)
Field of View: 20° x 15°
Thermal Sensitivity: 0.10°C @ 23°C ambient and 25°C Scene Temperature
Accuracy: The greater of ± 2°C or ± 2% of reading in °C
Power: Field Replaceable, High Capacity, Rechargeable Lithium Batteries with up to 7 hrs continuous operation,
Dimensions: 9.05 x 4.72 x 4.33 inches (230mm x 120mm x 110mm)
Weight (with Battery): approx. 1.65 lbs (0.75kg) approx. 1.76 lbs (0.8kg)
Included Accessories:
Easy Report & Report Writer Software, Rubber Boot, Carrying Case, Wrist Strap,
Rechargeable Battery, AC Adapter, User Manual and Image Analysis Software CD, USB Cable, SD Card, and SD Card Reader. HSI3003 includes Folding Sun Shade.
|
|
Proprietary reporting software (included) documents all of your work effortlessly
Fully Radiometric - capture detailed, high quality images for LIVE analysis of any of 19,200 pixels in the entire image
Dual cursors, moveable anywhere on the image, can be selected to automatically identify hot & cold spots
Advanced high resolution 160 x 120 detector shows image details clearly and precisely on the large, bright, 3-1⁄2" screen
Adjustable Emissivity for maximum accuracy
Dual Temperature + Differential Measurement
Store up to 20,000 images on supplied 2 GB SD Card
Easily download images directly to PC
Rugged, lightweight, and comfortable to use for any application
Comes complete in rugged waterproof carrying case
|
HSI3000 $4995.00
|
